2022 / SYSTEM INTEGRATION系統整合

Voron 2.4 build and upgradesVoron 2.4 組裝與升級

Independent assembly and iterative modification of an open-source Voron 2.4 printer in 2022, spanning mechanical assembly, electronics, firmware, and Linux host control.2022 年獨立組裝 Voron 2.4 開源打印機，並從機械、電子、韌體及 Linux 主機控制等方面持續改進。

MechanicalElectronicsLinuxCAN

Isometric CAD render of the Voron 2.4 open-source design — Voron Design reference CAD; not a photograph of my machine.Voron Design 參考 CAD 圖，並非我的實機照片。

01 / MY WORK我的實作

Assembly and integration組裝與整合

Mechanical機械Fastener choices, belt-drive and linear-rail assembly, and high-speed printing tuning.緊固件選用、皮帶傳動與線性滑軌組裝，以及高速打印調校。
Electronics電子Power selection, stepper motors and control boards, toolhead upgrade, and CAN communication upgrade.電源選型、步進電機與控制板配置、噴頭升級，以及 CAN 通訊升級。
Linux & firmwareLinux 與韌體Raspberry Pi-based host control, firmware configuration, and optimization.基於樹莓派的 Linux 主機端控制、韌體配置與優化。

Original design: Voron 2.4 is an open-source printer designed by the Voron Design community. I did not design the original printer; my contribution is its independent assembly, integration, and subsequent upgrades.原設計署名：Voron 2.4 是 Voron Design 社群設計的開源打印機。我並非原機型設計者；我的貢獻是獨立組裝、系統整合與後續升級。

Original Voron Design projectVoron Design 原始項目 ↗

Front CAD view of the open-source design

← All projects所有項目 Next: Embedded PCB design下一個：嵌入式 PCB 設計 →